Embodied Inventory of carbon and energy ICE


The Inventory for Carbon and Energy, or ICE, is a life cycle database representing a wide range of building and construction materials, published by the Sustainable Energy Research Team (SERT) at the University of Bath, UK.

In January 2011, Version 2.0 was published. This version is represented in CarbonKit.

The dataset

The dataset represents over 300 individual materials, including metals (e.g. aluminium, iron, steel), plastics, insulation, mineral-based materials (e.g. aggregate, cement, concrete, glass, stone), and organic materials (soil, timber) as well as manufactured composite materials such as carpets, photovoltaic cells, roads and windows. Each material is differentiated into a range of specific subtypes, and, in many cases, distinct representations of virgin versus recycled variants of materials are available.

For each type of material, the database provides measures of the embodied energy (i.e. MJ) and CO2 emissions (i.e. kg) which are related to specific unit quantities of the material. The bulk of the materials in the dataset are represented as mass quantities - that is, the embodied energy and CO2 emissions are represented on a per kg basis. Calculations are made, in these cases, by multiplying a mass quantity for the material by the appropriate factors. In some cases, materials are represented on an area basis (i.e. m^2), for example, carpets, roads and paint (kg [CO2] per m^2). In these cases, calculations are made by providing area quantities.

A number of materials are represented by slightly extended methodologies. For example, the methodology for concrete enables the specification of an additional quantity of reinforcing steel, while double-glazed windows can be specified as having their air spaces filled with insulating gases. The several types of timber that are represented additionally support the biogenic CO2 which is embodied in the production life cycle (i.e. the combustion of off-cuts for energy or waste disposal purposes). Users of the dataset can choose whether to consider these biogenic emissions together with fossil-derived CO2 emissions.

CO2e factors

For many materials, unit embodied emissions of CO2e are also available. This value represents all greenhouse gases associated with the production cycle, represented in terms of the equivalent quantity of CO2 which would exert the same atmospheric warming effect.

In cases where no unit CO2 estimate is available in the dataset, the authors advise that an approximate 'rule of thumb' for calculating CO2e is to increase CO2 emissions by 6%. This value represents on the embodied CO2e associated with fuel use (not process related emissions) and is based on the average fuel mix of UK industry.

Life cycle analysis boundaries

With a few exceptions, the life cycle analysis boundaries represented within the ICE database are designated as cradle-to-gate. The authors advise that, even within these boundaries there are many possible variations that affect the absolute boundaries of each material analysis. This arises predominantly from the use of secondary data resources which represent variable boundaries. The ideal boundaries are described by the authors as follows:

ItemBoundaries treatment
Delivered energyAll delivered energy is converted into primary energy equivalent, see below.
Primary energyDefault method, traced back to the ‘cradle’.
Primary electricityIncluded, counted as energy content of the electricity (rather than the opportunity cost of energy).
Renewable energy (inc. electricity)Included.
Calorific Value (CV)/Heating value of fossil fuel energyDefault values are Higher Heating Values (HHV) or Gross Calorific Values (GCV), both are equivalent metrics.
Calorific value of organic fuelsIncluded when used as a fuel, excluded when used as a feedstock, e.g. timber offcuts burnt as a fuel include the calorific value of the wood, but timber used in a table excludes the calorific value of the wooden product.
Feedstock energyFossil fuel derived feedstocks are included in the assessment, but identified separately. For example, petrochemicals used as feedstocks in the manufacture of plastics are included. See above category for organic feedstock treatment.
Carbon sequestration and biogenic carbon storageExcluded, but ICE users may wish to modify the data themselves to include these effects.
Fuel related carbon dioxide emissionsAll fuel related carbon dioxide emissions which are attributable to the product are included.
Process carbon dioxide emissionsIncluded; for example CO2 emissions from the calcination of limestone in cement clinker manufacture are counted.
Other greenhouse gas emissionsThe newest version of the ICE database (2.0) has been expanded to include data for GHGs. The main summary table shows the data in CO2 only and for the GHGs in CO2e.
TransportIncluded within specified boundaries, i.e. typically cradle-to-gate.

Changes in version 2.0

Version 1.6 of the ICE database was superseded by Version 2.0 in January 2011. The main changes/improvements are summarised below:

1The majority of data has been converted to CO2e which captures more than just CO2 (e.g. CH4, PFC's)
2The CO2 embodied in timber materials are now separated into fossil- and biogenic- CO2
3The recycled content approach has been revised to a 3-year average recycled content
4Data on cement has been brought in line with British Cement Association data
5ICE cement, mortar and concrete model has been revised and consequently the data is much improved
6New, UK specific data for precast concrete
7Aggregates and sand are now estimated from recorded UK industrial fuel consumption data
8Asphalt mixtures have been modelled from the binder content and the UK recorded mixing energy
9There is now data on recycled glass
10There are some notable improvements in the data for copper, carpets, paint, roads, rubber, sealants and adhesives, soil and stone

This category has no data items
Log in to perform calculations on this data
Name: Embodied_Inventory_of_carbon_and_energy_ICE
Full path: /documentation/Embodied_Inventory_of_carbon_and_energy_ICE
Parent Category: Documentation
Provenance: Bath University